The cost difference between the 2 versions is minor. It is inserted and removed similarly to a disk in real Mac Plus. Version 2 moves the SD card to the front of the Tiny Mac. Version 1 has a faux disk in the front of the Tiny Mac and the SD card accessible from the right side. You can now make a Mac Plus, SE, SE30 or Mac Classic.
#Mini vmac ii setup windows 10 full
Here's a full set of both Metric and US wrenches.Īll the STLs should be oriented properly on the build plate. Blue Painter's Tape for Version 1 of the case.3 - M3 X 12mm Hex Socket Head Cap Screws.You can use it to protect your Pi while configuring it. The small case is really not needed for the final project but is a nice to have. There are plenty of cheap options out there.Īmazon has a number of kits that include the above items. You can borrow a keyboard from your desktop. unless the applications you will be running need keyboard input. The keyboard is only really needed for setup. Anything much longer would be difficult to squeeze into the case. A SHORT GPIO 40 pin Male to Female ribbon cable.A Micro SD to SD Card Extension Cable Adapter Flexible Extender for Version 2 of the case.These can often be found as part of a starter kit. A mini HDMI to HDMI adaptor (for setup).A compatible power supply ( one with an integrated On/Off switch is a nice to have).Raspberry Pi Zero W OR Raspberry Pi Zero 2 W.If you are looking for the original STL files, they are available on Thingiverse.
#Mini vmac ii setup windows 10 install
If you need the to install software for the original iUniker screen, jump to Step 16. These instructions and models have been updated to support the Waveshare display. Version 2 has the relocated SD card that is inserted in the front where the original Mac disk is.Ĭheck out the differences in Step 1. Version 1 has a Faux disk and the SD card is accessible from the right side. Note: The STLs are updated for use with an updated screen. All the other parts are readily available. You will need access to a 3d printer for the case. I was able to make a smaller, cheaper and simpler version. Smaller, cheaper components and new fabrication methods have made the process far easier. Times have changed and technology has moved on. I really wanted one but didn't have the time or resources. Years ago I saw that John Leake, of RetroMacCast, built a 1/3 scale Macintosh.
0 kommentar(er)
